3D scanner

As the 3D printing market is growing, there are different types of printers in the market. The best 3d printer in Singapore does not come cheap, so it will be crucial to look at some key factors before jumping into an investment. The following are some things to take note of before buying a 3D printer:

Chamber Size/Volume

A chamber size would determine how much volume your prints will cover. On average, when you hold up your hand slightly fanned out, this is approximately the recommended size that manufacturers suggest for their printers. It must also be able to accommodate various shapes or objects without any issues. If you plan on using larger-sized chambers, however, make sure not your printer can handle it but also that you have a thick enough budget to accommodate the printer as well.

Operating Volume/Distance

This refers to how far or close your 3D object is placed from the extruder at any moment. If they are too close, it may cause defects in your print outs such as bubbles and blobs, which can make it difficult for you to use them further on. On the other hand, if your 3D objects are too far apart from the extruder, there might be a gap where no plastic can flow through this gap and onto your 3D object. This will give rise again to more issues later on during product usage or recycling of your printed objects into pellets that can then be reused for future prints. This is a key factor if you want to get the best 3d printer in Singapore.

Communication Connection

This is to determine your desired connection between your computer and the printer. If you are comfortable with a USB cable, this will be sufficient for you, and it will also save on printing time and cost due to its transfer speeds. However, if you prefer a wireless connection, then an SD card may be needed, but that would require more work in transferring your files from one device to another.

Printing Speed

The 3D printer we buy must be able to perform at high speeds so as not to affect our production output. These printers can go up to several meters per minute depending on the printing technique used by manufacturers when they assemble their machines before shipment or purchase.

Supports & Detailing

A 3D printer must be able to create supports in order to print certain objects or parts that may need support in order to stand on their own when completed. This is because when the 3D inkjet machine prints these objects, it cannot print onto thin air but needs enough volume so as to attach itself onto another layer of plastic which gives support for the next layer, thus creating an object with all the necessary layers intact without breaking apart. If the detail is desired, this has to be included in your model’s design before printing commences.

Filament Type & Size

The term “filament” refers to the printed lines that are extruded out into a 3D shape due to pressure from the nozzle head. The larger the filament is, the higher the overall print quality and final object size will be. The smaller they are, the lower the cost per print but also might require more time in the printing process compared to larger ones. Manufacturers may also introduce different types of filaments such as ABS or PLA, which both have their own advantages and disadvantages.

LEAVE A REPLY

Please enter your comment!
Please enter your name here